Summer Internship
- Energie / Matériaux / Mécanique Acquired the knowledge of manufacturing and testing of Electrical Machines at Heavy Electricals Equipment Plant (HEEP).
Ravi Jindal
Research and Technical Job- Electrical and electronics Engg.
32 ans • Nantes
Résumé
Graduated from Polytech Nantes France, I've pursued degrees of Research Master in Electronics Systems and Electrical Engineering. Keenly interested in Electromagnetic Field, RF Array Antenns, Electrical machines & their control, I'm active in the domains of Electrical Engineering, Control Systems, and Renewable Energy Sources.
Compétences
Expériences
Formations
Research Master Degree- Ecole Polytechnique University Of Nantes
2013 - 2015
Bachelor's degree- Bk Birla Institute Of Engineering & Technology, Pilani , India
2009 - 2013
Mes qualités
Langues parlées
Anglais Professionnel Hindi Langue maternelle Français Intermédiaire
Expériences Extra Professionnelles
Array Phased Shifter for Antenna Beam Steering- Research Master's Internship Project
Ietr-Cnrs Laboratory, Polytech Nantes, France -
Designed prototype circuit of low cost phased array antenna operates in Ku-band (10.7-12.7GHz) frequency composed of N×N radiating elements. This antenna aims at the reception of television satellite signals.The goal of this research is to provide better possibility of electronic beam control instead of manual or mechanical control, and design compact and low cost phase shifters to be inserted in the feeding network of this antenna. The electronic control of the phase shifter will allow the control of beam steering. The emphasis of this project will be done at the beginning on the design of a good phase shifter in Ku band. The aim of this research is to define, simulate, release and measure a continuous phase shifter. Better reflection loss, low transmission loss, low Cost of array antennas, large range of phase-shifter, phase flatness and bandwidth will be achieved by providing better gain.
Reuse of Water through Moisture Extraction (Water from Desert Air)- Research Project
Aditya Birla Traning & Research Center, Pilani, Rajasthan, India -
1.The aim of this project was to provide an updated model to extract water from air and recycle the waste water for its reuse. 2. The output water has the TDS value of 120mg/l and the pH in the range of 6.5 to 7 3. 5th position in all India paper presentation Competition (Ideas) organized by IIT Roorkee.
Designing Microstrip Rectangular Patch Antenna- Project
Aditya Birla Traning & Research Center, Pilani, Rajasthan, India -
1. Reduced Return Loss and Insertion Loss 2. Frequency used: 2.4 GHz and 10 GHz 3. Software Used : HFSS (High Frequency Structure Simulator)
Research Project- Smart Helmet
Aditya Birla Traning & Research Center, Pilani, Rajasthan, India -
1. The idea is to mandate the use of Helmet while driving, which will reduce the damage caused by an accident. 2. Smart Helmet works on the technology of human touch sensor. 3. Software used : Arduino/ KeilμVision3 4. Hardware used: Arduino board, 8051 Microcontroller board, Capacitive Proximity Sensors 5. Selected in Top 14 electronics projects at all India level in APOGEE 14 (Technical Festival) of BITS PILANI.
Mes souhaits
PHD in RF Antenna System