Octavian Chiticaru - WIZBII Octavian Chiticaru a publié son profil professionnel sur WIZBII. O C

Octavian Chiticaru

Electrical Supervisor

60 ans • Onești

Résumé

A highly skilled Electrical Technician with over 35 years’ experience in Oil & Gas Industry and Power Plant. I have experience in construction, pre-commissioning and commissioning in electrical installations with high degree of professionalism. Also I have experience in maintenance of electrical equipment, checking, operation and repairs. I worked on offshore FPSO and jack-up, onshore in Oil fields extraction, Refinery Plants, Gas Plants and Power Plants.

Compétences

Good Knowledge In Operating Computers And Install Software. Ability To Work Independently Without Supervision And An Ability To Exercise Leadership. Friendly And Outgoing Personality. Analytical Mind. Difficult Problem Solving Abilities. Good Operation Planner And Organizer.

Expériences

Electrical Supervisor

- Energie / Matériaux / MécaniqueSupervising the execution of electrical installation (power and control circuits, single and three phases supply circuits), general, emergency and stand-by lighting installation. The preparation of the necessary materials for the works in electrical installations (control and power panels, power supply for motors, overhead and underground cables, lighting conductors, ladder-racks and cable trays). I prepared and followed through on all required punch list. Erection and pre-commissioning activities, verifying the mounting deficiencies, taking over the electrical equipment, participating in pre-commissioning, commissioning and start-up and running test.

Electrical Technician – Instructor local workers

- Energie / Matériaux / MécaniqueLocation: Paloich Oil Field, South Sudan Client: DPOC – Dar Petroleum Operating Company, China Responsibilities: Training local staff to work with the E&I equipment in the plant and in the oil wells field. Preventive maintenance in FSF (Field Surface Facility) and FPF (Field Production Facility). Start/ Stop Emergency Diesel Generators. Training of local personnel (E&I Technicians) in FSF (Field Surface Facility) and FPF (Field Production Facility). Check power supply for PCM (Progressive Cavity Motor), scan with cable detector PL2000 in oil field, check and replace thermostat and contactors for heat tracing, drain heaters, contactors and relay’s in cubicle MCC. Check electrical installations and motors for chemical skid, outdoor and indoor lighting, adjust and replacing timers and photocell’s in OGM (Oil Gate Manifold). Check cathodic protections for pipes, check AC splitters. Calibrate, check and replacing Pressure Switch 350 PSI and 500 PSI, calibrate check and replacing TG (temperature gauges), TIT (Temp Indicator Transmitter) and PIT (Pressure Indicator Transmitter), replacing THP gauge pressure (Top High Tubing), CHP (Cassing High Pressure), check and replacing Flow meters, PIG Launcer, check FAP (Fire alarm protection), FOTE (Fiber optical transmitter), etc

E&I Supervisor

- Conception / Génie civil / Génie industrielLocation: LNG Port Fortin, Trinidad & Tobago Client: Atlantic ALNG Trinidad Position: Field E&I Engineer Responsibilities: I coordinated a team of 8 workers in all works for shutdown and replace for Gas Turbine type Frame 5-MS 5002 in LNG Plant. Disconnect and connect instruments. Checking electrical motors and panels. Loop check for instruments. Commissioning for electrical and instruments.

E&I Supervisor

- Conception / Génie civil / Génie industrielLocation: Das Island, UAE Client: ADGAS Position: Field E&I Engineer Responsibilities: Commissioning and Start-Up for GE Frame 5 Turbines - ABB electrical equipment’s (checks, measurement, etc). I've assisted the teams (6-8 workers) for loop check and calibration of instrumentation equipment for Frame 5 Turbines.

Electrical Supervisor

- Travaux / ChantiersLocation: Arzew Liquefied Gas Plant GNL3Z , Algeria Client: SONATRAK Algeria Position: Electrical Supervisor Responsibilities: Interface between client (Saipem) and subcontractor. I supervised as a E&I Engineer installation, commissioning and start-up ABB electrical and instrument devices for E&I equipments and G.E. Gas Turbines Frame 5 MS 5002, Feed Gas Propan Compression, Frame 7 model MS 7001 DLN for LP –MR/MP–MR Main Refrigerant & PR/HP-MR Compression Trains. VSDS Helper Motor Siemens 6,6 MW.

Electrical Supervisor

- Location: Pipe Line Project, El-Merk and Gasitouil, Sahara - Algeria Client: ANADARCO Position: Electrical Supervisor Responsibilities: Mounted and connected solar panels, instrument system and marshalling cabinet. Mounted and connected power supply cabinet, photo voltaic solar cell, load distribution box, battery disconnect switch, 24 V DC power cabinet, IP telephone, cathodic protection. I coordinated a team in electrical & instrumentation works in Oil & Gas Block Valve Stations in network pipelines El-Merk and Gassi Touil Sahara. I prepared and followed through on all required punch list. Monitoring work progress for instrument and electrical in accordance with their submitted work schedule. Co-ordinate the activity for mounting instrument equipment and electrical equipment. Mounted and connected instruments and junction box. Preparation for energizing electrical installations. Running test. Check instrument circuits, electrical circuits and test.

Electrical Supervisor

- Travaux / ChantiersLocation: Atyrau, Oil&Gas Plant Karabatan, Kazakhstan Client: AGIP Italy Position: Electrical Supervisor Responsibilities: Part of Completion Team in inspections. Inspections with the client inspectors and construction inspectors for RFI (Request For Inspection). Completion of Tricards (Work Permits) for works in electrical installations. Walk down in different areas from field. I prepared and followed through on all required punch list. Monitoring teams in work progress in accordance with their submitted work schedule. Subcontractor coordination with regards to their daily activities for puling cables, mounting cable trays, mounting could and hot heat tracing. Attend meetings and advise Subcontractor the priorities to be taken into consideration. Safety meeting with all personnel for safety works. Keep daily activity progress record and log any problems that may exist for immediate action. I prepared and followed through on all required punch list. Pre-commissioning for ABB electrical equipment’s. Inform the Superintendent about any technical problems that may arise at site to avoid delay in work schedule. Request for materials.

Electrical Supervisor

- Conception / Génie civil / Génie industrielLocation: Kandahar, Afghanistan Position: Electrical Supervisor Responsibilities: Preventive maintenance for Power Generations and Electrical Equipment. Involved also in repair and maintenance related to the electrical devices and equipments. Daily technical meeting. Co-ordinate the Lead Electrical Technicians in planning and executing daily work activities. Checking ground connection of the electrical equipments. Execution and testing of interconnections at secondary circuits in electrical panels. Starting and Stop Power Generators. Replacement components parts for Power Generators and electrical panels. Complete insulations test on circuit. Power distribution equipment, performing diagnostic tests and troubleshooting system faults and failures, of all electrical equipment down to the component level.

Electrical Supervisor

- Conception / Génie civil / Génie industrielLocation: Port Harcourt, Agbani Barge FPSO-Nigeria Position: Electrical Supervisor Responsibilities: Executing daily maintenance works for electrical equipments. Measurement cables and motors. P.M.(Periodical Preventive Maintenance) for Gas Turbine Generators, Diesel Generators, Emergency Generators, Electrical Motors HV and LV, Contactors, ABB Electrical Equipment of 3,3 KV circuit breakers and 460 Volts switches, Transformers 3,3 KV/460V, Electro chlorinators, A/C Units, Batteries, Galey Electrical Equipments, Workshop Equipment, Laboratory Equipments. Welding Equipments, Normal Lighting and Emergency Lighting, Radio Room Equipment, Gas Detectors, Calorfiers, etc. Starting and maintenance for Gas Turbines Siemens. Starting Diesel Generators and Synchronization. Replacing contactors, relay protections, fuses, etc. Execution of cable termination and connections in electrical panels and distribution boards. Recharge and check Batteries. Maintenance and monitoring of cathodic protection ship. Coordinates the testing and repair to the electrical equipment and well safety systems, records keeping and testing of this system. Execution of works in the electrical installation with work permit and hot work permit. Prophylactic measures to generators and the permanent magnet, checking and replacing thyristors. Isolation and desisolation supply for electrical equipment in switch room (connecting-up and disconnecting electrical equipment). Daily technical meeting and safety meeting.

Electrical Supervisor

- Conception / Génie civil / Génie industrielLocation: Jack Up Casablanca Platform, Mediterranean Sea, Spain Position; Electrical Supervisor Responsibilities: P.M.(Preventive Maintenance) for Crompton electrical equipment, Diesel Generators, Transformers, Motors, Relay protections, A/C units, Workshops Equipment, Normal Lighting and Emergency Lighting, Gas Detectors, etc. Isolation and desisolation supply for electrical equipment in switch room (connecting-up and disconnecting electrical equipment). Executing daily maintenance works updating the equipment history. Checking and maintenance of the generators. Insulation resistance of wining, omich resistance. Measurement in MCC, transformers, cables and motors. Maintenance the outside and inside standard lighting and emergency lighting. Electrical motors system checking for short circuit protections, overload protection. Insulate resistance on switchgear transformers, generators and bus bar with meager.

Electrical Supervisor

- Location: Baghdad, Iraq Position; Electrical Supervisor Responsibilities: I supervised electrical team for maintenance electrical equipment from base. Testing and maintenance of the generators. Complete insulations test on circuit. Insulation resistance of wining, omich resistance. Checking electrical equipments in sub-stations. Making the connection at the mains. Replacing component parts for electrical equipments. Ground connection of the electrical equipments, motors, transformers. Junction boxes installing and connection including glanding and terminal. Daily maintenance for motors, MCC, lighting, transformers, breakers, etc. Daily technical meeting and weekly safety meeting.

Electrical Supervisor

- Travaux / ChantiersLocation: I.P.S. Port – Gentil, Gabon / Eshira field Department: Oil & Gas Position: Electrical Supervisor Responsibilities: I supervised the works for 33 KV cable joints. Making HV test with 30 KV injection test kit. Making terminal cables and cable joints of LV, MV and HV. Monitored the operational efficiency of all electrical equipment’s to ensure optimum performance and carried out remedial work under direction. High test of windings to ground. Insulation resistance of wiring, omich resistance.

Electrical Supervisor

- Conception / Génie civil / Génie industrielLocation: Saturn, Gloria, Prometeu, Venus Jack-up Platforms - Black Sea Position: Electrical Supervisor Responsibilities: I was responsible for maintenance, removal of ABB electrical equipment, repair and documentation of the entire offshore unit’s electrical systems and equipment to include all electrical power generation sources, rectifiers and circuits, transformers, power distribution equipment, electrical motors and controllers. I coordinated the electrical team in performing, diagnostic tests and troubleshooting system faults and failures of all electrical equipment down to the component level, all refrigeration and air conditioning systems. Maintenance of Lighting System. A.C. motors that drive: Elevator motor (Jacking). Skidder gear unit (longitude and transverse). Reading and understanding electrical drawing (such as one line and wiring diagram, control schematics etc). Switchgear and power distribution maintenance. Installation Alarm systems and Fire & Gas detection. Relay logic troubleshooting. Maintenance of electrical AC and DC motors. Grounding for all electrical equipment. Raw water tower gear unit. Raw water pump. Rotary table drive blower. Electric cranes and controls.

Electrical Foreman

- Conception / Génie civil / Génie industrielLocation: Onesti, Romania Position: Electrical Foreman Responsibilities: I coordinated electrical team for preventive maintenance and repairs for generators, transformers and motors. Maintenance and replacement for synchronous and asynchronous electrical motors, AC motors and DC motors. Maintenance for LV, MV and HV Transformers. Maintenance for medium and high circuit breakers. Replacing of the primary and secondary circuit switches and relay protections. Maintenance and replacing Over current relay-made by Basler electric-U.S.A, Under voltage relay-made by Basler electric-U.S.A, Low voltage -SWG(Switch Gear)-made by Powell electrical-U.S.A, Multilane - protection relay, Differential relay made by ABB Power T&D Company Inc, SWG (switch gear)-made by Powell Electrical, UPS (Uninterruptible power supply). Checking and test earthing connection of the electrical equipments, motors, transformers, etc. Making terminal cables and cable joints of low, medium and high voltage. Complete insulation test on circuit.

Electrical Technician

- Conception / Génie civil / Génie industrielPeriod: September 1982 – Aug 1995: Borzesti Oil & Gas Platform Location: S.C. RAFO S.A. (Power Plant, Refinery Plant Onesti), Romania Position: Electrical Technician Responsibilities: Mounting power distribution equipment, electrical motors and controllers, transformers, separators, breakers, switches, cables and test. Junction boxes installing and connection including glanding and terminal. Cables tray installations. Making cable terminations. Replacing switchgears and power distributions. Assembly cable trays. Mounting cables supplied tension of the electrical engines and electrical stations and substations. Testing of transformers, cables and motors. Mounting box distributing and box branches. Mounting distribution panels. Brand of electrical equipment used: ABB, Siemens, AEG, Telemecanique. Commissioning for electrical equipments. Maintenance, repairs and replacement electrical equipment in electrical stations and sub-stations (separators, circuit breakers, component parts for circuit breakers, etc).

Formations

Energetically Group School Onesti - Professional High School - Electrical Technician

1978 - 1982 Onești, Romania, OneștiEnergie / Matériaux / Mécanique

Mes qualités

Communicant·e
Réactif·ve
Esprit d'analyse
Esprit d'équipe

Langues parlées

  • Anglais

    Professionnel

  • Français

    Notions

  • Roumain

    Langue maternelle

Expériences Extra Professionnelles

Electrical Foreman

1992 - 1995: Energetically Group School Onesti - Electrical Foreman Technical School – Power Stations And Electrical Networks
-

Electrical Foreman

Faire de chaque avenir une réussite.
  • Annuaire emplois
  • Annuaire entreprises
  • Événements